What does IP68 actually mean?

Modern phones rarely come without some kind of protection from the elements, particularly for dust and water. What used to be quite a niche feature of purpose-built phones has now become a standard, and most upcoming smartphones will likely have some form of dust and water protection. What’s more, when companies release their flagship phones, everybody expects them to come with waterproofing — if they don’t, it is counted as quite a big flaw of the device.

Honestly, it shouldn’t come as a surprise. If you’re spending good money on a device, whether it’s an action camera, smart sports watch or a new phone, you need to know it’s going to survive the rain or an accidental trip into a toilet bowl.

Manufacturers know about this, and most of the new phones, especially the higher-end ones, come with water and dust protection nowadays. This has also resulted in some controversies, as the likes of Apple tried to explain getting rid of the headphone jack as a way to make their phones waterproof – and not as a way to sell Bluetooth headphones.

Manufacturers telling you that the device is waterproof is one thing, though, but having it confirmed by a third party is another. That’s why all the waterproof devices have some kind of certification that informs you what types of conditions they can withstand and guarantees that the product passed rigorous tests to confirm its resistance levels. Unfortunately, this system might be a bit confusing. It can be confusing with so many different codes, stamps and names for water and dust-resistant qualities and certifications. Let us explain what all of these mean.

IP ratings: What do the letters and numbers stand for?

The mIP rating is the most common waterproofing certification on electronic devices. This certification is regulated by the International Electrotechnical Commission (IEC) and is generally recognized as reliable and trustworthy. If you see an IP rating on your device, you can be sure that it was properly tested and conforms to the specified standards.

IP ratings are usually made up of four characters. There are two letters followed by two numbers, without any hyphens or spaces between them. It’s important to remember what the certification looks like, as some dodgy manufacturers might try to deceive you by putting similarly-looking codes on their device to trick you into thinking it was certified as waterproof.

The first two characters, I and P, stand for Ingress Protection or – in other words – how good it is at stopping stuff from getting inside it. The first numeral indicates how good it is at protecting against small solids (dust/sand, etc.), with a maximum rating of 6. This ranges from no protection at all to being dust-tight.

After the four usual characters, you might also get some additional letters denoting particular kinds of elemental protection. However, these are much more technical and do not appear on personal tech products, so you really don’t have to worry about them.

The second numeral is the liquid or water resistance rating, with a max rating of 9. That’s from no protection up to high-pressure and high-temperature water jets.

In other words, if you see IP69 somewhere, you know it offers the highest IP rating for both dust and water resistance. At least when it comes to the IP-rating certification.

There is one more sign that might appear in place of any of the two numbers – it’s the capitalized X. If you see the X in place of one of the numbers, it means that insufficient data was collected in order to certify the device in this area. The IP certification costs the manufacturer a considerable amount of money, so if they have another certification or feel like they don’t need one of the IP standards, they might just opt for certifying for one of the two types of protection.

What does IP68 mean?

There is a large number of combinations when it comes to IP ratings, and it can get confusing, but IP68 is one of the most common you’ll find on technology devices.

When it comes to solids, devices have been tested against dust and found to be dust-tight. Anything with a “6” as the first numeral is as impervious to dust as can be tested and certified on this particular scale. For the second numeral, the 8 denotes that it’s protected against submersion in water up to a defined depth and time duration.

• IP = Ingress Protection
• 6 = Dust Tight
• 8 = Survives being submerged in water

It’s probably worth noting that just because something is IP68-rated and great at lasting underwater, it may not be tested to withstand rain or spray from a jet of some kind. This is why Sony states IP65/68 on its devices. However, in most cases, you’d assume that if a device conforms to the IP68 standard, it also should be able to handle the conditions needed to pass the IP65 certification.

Sony/ Pocket-lint

Another thing to mention is that the IEC (which governs the international standards for IP ratings) doesn’t specify what the depth or the duration of water protection is – it just sets a standard for 7 and 8, saying that 8 needs to be more than 7. Typically, you’ll find that 7 would be 1 metre for 30 minutes, and 8 would be more than that – but manufacturers should state what protection level has been tested. For instance, Apple says its IP68-rated iPhone 15 can survive being up to 6 meters deep for up to 30 minutes.

What about IP65, IP53 or others?

Often times, you’ll see products with more than one IP rating, and that’s simply because they’re tested for different kinds of waterproofing. For instance, the Sony Xperia 1 IV has both IP68 and IP65 ratings. As mentioned already, the IP68 rating means it can survive being submerged. IP65 denotes that it’s also good at handling spray.

Technically, it’s tested using water being projected by a 6.3mm nozzle. In real-world use, though, it just means it can survive the rain or the shower. Just don’t go spraying it with a pressure washer.

If you find an older device with IP53, that means it’s somewhat protected against dust, but not totally, and can live with spraying water, but not jets of water and certainly not being submerged.

What’s with the Apple Watch’s IP6X, WR50 and WR100 ratings?

• IP6X = Dust tight
• WR50 = Water resistant up to 50M
• WR100 = Water resistant up to 100M

Apple Watch Series 7 was announced in September 2021, and — in the announcement – two unfamiliar terms were used to denote how water and dust-resistant the latest watches are: IP6X and WR50. These have since translated across to the Series 8 and the Apple Watch SE (2nd generation). The Watch Ultra has IP6X, too, though it has WR100 instead of WR50.

As we’ve already mentioned, the first numerical value is for dust resistance. Like any device with IP68 or IP67, that “6” means it’s dust resistant to a very high level or is “dust tight”, meaning no dust can get into the watch. The “X” means it doesn’t have an IP rating against water, but that doesn’t mean it’s not water-proof – it’s just not certified as conforming to that standard.

Apple’s (and others) WR50 and WR100 labels mean water resistant to 50 metres or 100 metres, respectively, and since that’s way above the 1.5m depth that’s certified by the standard IP-rating system, there’s no real need to have devices with those labels certified. They are water-tight, and you can take them swimming or out in the rain on a run.

It’s much more common for watches to supply water protection figures in depth (50m, for example) or in atmospheres (5ATM), which is a reflection that it will survive the water pressure at that depth.

What does IPX7 or IPX8 mean?

The presence of the X in the rating does throw some people, but devices like the first generation Apple Watch, some Garmin cameras and wearables, and even some phones feature it. It means the device hasn’t been certified for protection against dust, but it doesn’t mean it isn’t dust-resistant.

This simply means it can withstand water ingress – such as the Samsung Galaxy Z Flip 5, which has an IPX8 rating, meaning it can withstand immersion in water but has no protection against dust ingress (because of the hinge design).

What is nano-coating?

Nano-coating is a microscopically applied film that’s sprayed over the internal components to help water roll away from anything that could potentially be damaged by moisture.

Some companies like to build their phones with a water-repellant nano-coating but don’t offer a specific IP rating. With these devices, like the old Moto Z, the phone will probably be fine with accidental spills, light rain, or the odd splash, but it won’t survive being submerged or when faced with jets of water or heavy rain.

This type of nano-coating has evolved and will offer complete protection from submersion, too, without relying on seals in the phone’s body.

What does ATM mean?

Although some smartwatches will include an IP rating, you’ll more often than not find waterproof capabilities denoted by ATM, at least with watches designed for sports or outdoor activities. ATM stands for atmospheres (nothing to do with cash machines) and basically indicates how much pressure it can take. Or, in other words, how deep can you take it underwater?

It’s normally reserved for devices designed to be used underwater, and in most cases, 1 ATM is 10 metres, 5 ATM is 50 metres and 10 ATM is 100 metres. With the Apple Watch models (except the Apple Watch Ultra), for example, that depth is 50 metres, so it can be used to track swimming.

For a breakdown of each individual’s possible IP rating, check out the level-by-level chart at the IEC.